Josh P asked:
the derailer (sp?) on my mnt bike broke and its my only form of transportation, so i was wondering if there was a way i could make it a single speed without …

Licious asked:
That is, what “rank” did the toolmaker have in the society?

Kelsie ☮ asked:
(i asked a question simlar to this earlier) i already have a powerlink like the one SRAM makes, http://www.chainreactioncycles.com/Models.aspx?ModelID=871 but i can’t get it to connect. i don’t have a chain tool …

ape54321 asked:
There is a master link with a “figure-eight” silouette shaped pin hole on the outer part of the chain. Do I break the chain here? If so how? Also …

grae asked:
just using normal tools like pliers and screwdrivers
the chain is very long and flaps about too much, even on both largest rings theres loads of spare movement in the mech and on the …

M.B. asked:
I just bought a used bike and it came with a new greased chain. The problem is that the chain is not connected in one spot and it is a little too …

chatwithbrojoe asked:
value chain analysis caculation

matrixneo_1392 asked:
I found a bike frame recently, and it needs some work, but it functions. The chain, however, is badly rusted, and I can’t get it off. The only tools I have are limited …

larryglass25 asked:
My chain is so covered in gunk that I’m debating whether I should spend $20 on a new chain or $20 for one of those chain cleaning tools you attach to your chain …

Casa B asked:
really old game/ program that went on my computer… i had tools like a chain saw and hammer that would bang and ***** up the screen of my computer for fun.