This Domain Name Is For Sale! Click Here For More Details
 

Posts under ‘Do It Yourself (DIY)’

I have a Craftsman 28,000 rpm Rotary Hand Tool Model #672.365780?

Aug 18th, 2010
by admin.
2 comments

Snook asked:
It is a chain sharpening tool & it appears to be made by The Dremel Corp. & the plastic connector between the motor and chuck completely shattered and I would like to know how to order a new a replacement connector?
It is a Chainsaw chain sharpening tool apparently manufactured by the Dremel [...]

My toilet won’t flush – the lever won’t operate the mechanism?

Aug 2nd, 2010
by admin.
8 comments

Point&Click asked:
Please can you help guys?
I’d rather not waste money on a plumber if I can fix this my self.
When pulling the handle down, no water is let out into the bowl.
The flush handle is loose, so I first though a new lever would resolve it. But when I opened the tank and [...]

How do you remove a chain link fence, including the concrete the posts are in?

May 3rd, 2009
by admin.
13 comments

Peter M asked:
I have about 150 ft of chain link fence, and I am looking to remove it. I would like to know what tools are necessary. I am not interested in sawing the posts and leaving the rest in the ground. Thanks

how to bend 2 1/2″ pipe 25 foot long in the feild. all i have is welder,torch, chain ,cumalong?

Mar 19th, 2009
by admin.
6 comments

Tim F asked:
I,M BUILDING A GATE ENTRANCE 20 FOOT HIGH AND NEED TO BEND THE 2 1/2 TOP RAIL IN THE FORM OF AN ARCH TO WELD TO MY UPRIGHTS THERE WILL BE 20 FOOT CLEARENCE ON EACH SIDE OF THE ENTRANCE WITH ABOUT 25 FOOT CLEARENCE IN THE CENTER. I DON,T HAVE ANY [...]